Bunker Hill Security 64759 Owner's Manual & Safety Instructions page 7

Motion Detector Control Knobs (cont.)
SENS (Sensitivity)
Adjust Sensitivity
(to sense small or large
moving objects)
The SENS Adjusting Knob sets the level of
sensitivity of the Motion Detector Head.
The Motion Detector Head is most sensitive to
movement across the detection zone, rather than
movement toward or away from the
Motion Detector Head.
Movement is best detected at a distance of
40 feet or less.
Note: Turn the dial anywhere between the minimum and
maximum settings to adjust the level of sensitivity, as needed.
TIME (Light Duration)
Adjust Time
(how long the light will stay ON)
The TIME Adjusting Knob sets how
long the Light stays lit after motion is
no longer detected by the sensor.
The TIME is adjustable from 5 seconds to 2 minutes.
Item 64759 For technical questions, please call 1-888-866-5797.
Sensitivity is affected by the ambient air
temperature. If it is hot outside, the sensor
has difficulty detecting changes in heat.
In cold temperatures, the sensitivity is
increased and may need to be adjusted.
Minimum Position
Turn the dial counterclockwise
to the minimum setting. Ideal for
cold winter conditions or when
nuisance tripping is a problem.
If the light is activated by small
animals or rapid changes in
heat, the sensitivity can be
reduced by turning the knob
counterclockwise towards the
minimum setting.
Maximum Position
Turn the dial clockwise to
the maximum setting. Ideal
for hot summer conditions
or to maximize range.
Minimum Position
Turn the dial counterclockwise
to the minimum for the light
to stay on for 5 seconds after
motion is no longer detected.
Mid Range
Adjusting the dial between
the Minimum and Maximum
to choose any time between
5 seconds and 2 minutes
for the light to stay on after
motion is no longer detected.
Maximum Position
Turn the dial clockwise to
the maximum for the light to
stay on for 2 minutes after
motion is no longer detected.
Page 7