Setting The Operating Configuration (Setup); Displaying The "Setup" Screen - Sony NSP-100 Operating Instructions Manual

To change the page
When the "Video" screen or "Graphics" screen is
divided into a number of pages, to change the page,
press the b or B button.
3
Using the b and B buttons, select the movie or still
image file to be deleted.
4
Press the ENTER button.
A message appears, prompting you to confirm the
deletion.
The file to be deleted appears in the background, as
a movie or still image. At the end of a movie, the
last frame remains stationary.
Note
In the "Setup" screen, if item 2. "Delete
Confirmation" is set to "No," this confirmation
message does not appear.
5
Using the b and B buttons, select "Yes" or "No,"
and press the ENTER button.
• If you selected "Yes," the movie or still image file
selected in step 3 is deleted.
• If you selected "No," the file is not deleted, and
the screen before executing step 4 reappears.
16

Setting the Operating Configuration (Setup)

Setting the Operating
Configuration (Setup)
To make settings relating to the operating configuration,
display the "Setup" screen.

Displaying the "Setup" Screen

To display the "Setup" screen, in the "MENU" screen,
carry out any of the following operations.
• Press numeric button 0.
• Using the v and V buttons, select "0. Setup," and
press the ENTER button.
The "Setup" screen appears.
Settings selected in the "Setup" screen
The settings selected in the "Setup" screen are as
follows. For details, see the respective pages.