Displaying The "Menu" Screen; Playing A Playlist - Sony NSP-100 Operating Instructions Manual

Displaying the "MENU"
Screen
In the standby screen, press the MENU button.
The "MENU" screen appears.
In the "MENU" screen, you can select the next screen to
be displayed. The screens to be displayed are shown in
the following table.
Screen to be selected Section with details
1. "Playlists" screen
2. "Video" screen
3. "Graphics" screen
4. "Delete Files" screen
0. "Setup" screen
To exit the "MENU" screen
Press the MENU button.
Note
If no remote controller operation is made for about five
minutes during the display of any menu screen, the
standby screen appears.
Alarm indications
An alarm icon appears at the lower left of the menu
screen to indicate an abnormal temperature within the
unit or other problems.
For details, see page 27.
Alarm icon
12
Displaying the "MENU" Screen / Playing a Playlist
"Playing a Playlist" (page 12)
"Playing a Movie File" (page 13)
"Displaying a Still Image File"
(page 14)
"Deleting Unwanted Playlists and
Files" (page 14)
"Setting the Operating
Configuration (Setup)" (page 16)

Playing a Playlist

In the "Playlists" screen, you can select a desired
playlist, and play it.
You can also make the following specifications.
• Automatic playback at power on
Playlist that starts playback automatically when the
unit is powered on
• PLAY button playback
Playlist that starts playback if you press the PLAY
button in the standby screen
For details of these settings, see "Carrying Out
"Playout Mode Setup (Playlists)"" (page 18).
To select a desired playlist and play it, use the following
procedure.
1
In the "MENU" screen, carry out any of the
following.
• Press numeric button 1.
• Using the v and V buttons, select "1. Playlists,"
and press the ENTER button.
The "Playlists" screen appears.
1
2
3
1)
1 New playlist indication
2 Automatic playback at power on indication
3 PLAY button playback indication
1) The new playlist indication shows playlists that have been added
since the last time the playlist display was shown.
2) This is a display for example only. If this display were actually
present, playback would have started when the unit was powered on.
2)