Silk'n Blue Manual page 12

2.2 Prepare your skin for treatment
Wash your face with water and dry with a clean towel to
assure that your skin is clean, dry and free of any powder,
gel or cream.
2.3 Prepare your Silk'n Blue device for treatment
Press the ON/OFF Switch. The STANDBY - indicator light
will come on and the READY/TREATMENT - indicator
light (K) will be lit steadily.
Your Silk'n Blue is ready for treatment.
2.4 Skin test
Before treating with Silk'n Blue for the first time, we
recommend that you carry out a skin test on your
forearm, to verify that your skin is not sensitive to the
effect of Silk'n Blue.
Hold the Silk'n Blue applicator and apply its Treatment
surface on your forearm skin constantly for 3 minutes.
Make sure that the treatment surface is in full contact
with the skin. (The LED light will automatically activate.)
If during the 24 hours following this test, no adverse
reaction appears, you may start the treatment course.
2.5 Perform the treatment
Attach the TREATMENT SURFACE to your skin. The
12