Accessories - Graco Therm-O-Flow Series Instructions-Parts List Manual

Description
LOW PRESSURE HEATED HOSES
14 MPa (138 bar, 2000 psi) Heated hoses for use with Therm-O-Flow
Therm-O-Flow 55 supply units. Contact your Graco Service Representative for more
information.
HIGH PRESSURE HEATED HOSES
28 MPa (275 bar, 4000 psi) Heated hoses for use with Therm-O-Flow 5 and Therm-O-Flow
55 supply units. Contact your Graco Service Representative for more information.
HOSE FITTINGS
For use with heated hoses. Do not use fittings with temperature ratings that are lower than
the operating temperature of your system. Contact your Graco Service Representative for
more information.
#8–37° SAE [3/4–16 (m)] x 1/2 npt male adapter
#10–37° SAE [7/8"–14 (m)] x 1/2 npt male adapter
NOTE: The following accessories are not applicable to Model 297266.
EXTRUSION NOZZLE ADAPTER NUT [5/8-18(f) x 1/8 npt(f)]
Adapts 1/8"–27 npt (m) nozzles to dispense valve. Accepts the adapter nut. 5/8–18F X 1/8
npt(f) nozzles listed below. Contact your Graco Service Representative for more
information.
Description Length
Nozzle 2"
2"
21/8"
2-7/16"
1-7/32"
STREAMING TIP ADAPTERS
Ø 0.469 opening adapter for automatic dispense valve. Use tips listed below. The last 3 digits of the
part number indicate the orifice size. Contact your Graco Service Representative for streaming tip
selection.
Orifice Size
(inches) Part No.
Odd sizes .025" through .047"
0.25 270025
0.37 270037
0.47
270047
310538N

Accessories

Use Only Genuine Graco Parts and Accessories
Orifice Thread
Ø 3/32" 1/8" npt
Ø 1/84"
Ø 1/8"
Ø 3/32" x 3/8"
Ø 1/8"
Orifice Size
(inches)
.061
.063
.065
.067
.077
®
5 and
Part No.
161505
607665
164799
C01025
C17009
Part No.
270061
270063
270065
270067
270077
Accessories
Part No.
C20700
C20703
C32089
617585
43