Advertisement
1.3.10
Alarm devices
1.3.11
Terminals
1.3.12
Mains / fire control installations with low voltage
1.3.13
Interfaces to non Cerberus systems
1.3.14
Standards
12
Fire & Security Products
Siemens Building Technologies Group
Twisted cables, note max. permissible voltage drop: Approximately max. 10%.
Separately installed terminals to the control unit according to control unit specifications.
Standard installation cable, as required by country concerned.
Cable fed into equipment as well as internal wiring must be in compliance with the instal-
lation documents for the equipment (cable separation).
Remote transmission equipment or danger management systems mounted separately
from the control unit must be wired according to the corresponding manufacturer's
instructions.
In general, the standard IEC 950 also applies
(International Electrical Commission)
e1453b
12.2001
Hide quick links:
Advertisement
