Assembly & Use - Linea DOMO DO9182KR Instruction Booklet

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
ASSEMBLY & USE
KNEADING/BEATING/WHISKING
1.
Depending on the nature of the ingredients, the mixing bowl with lid can make 2 kg of
dough.
2.
Place the appliance on a flat, clean and dry surface.
3.
Make sure that the plug is removed from the socket and that the speed control is set to
'0'.
4.
Turn the release button a quarter turn to the left, push the head up entirely and turn the
release button to the right again, so that it points upwards, to lock the head.
5.
Put the mixing bowl in the base and turn it clockwise so it locks. Put the ingredients into
the bowl.
6.
Choose the accessory you want to use: beater, dough hook, balloon whisk.
a. Attach the accessory to the head by sliding it around the axis.
b. Turn the accessory a quarter turn counterclockwise.
c. Release the accessory so that it falls into the lock position. Caution: only use the dough
hook up to a maximum of speed 1.
7.
Turn the release button a quarter turn to the left, push the head down entirely and turn
the release button a quarter turn to the right again so that it point upwards, to lock the
head.
8.
Place the lid onto the bowl. Slide the opening on the lid.
9.
Put the plug into the socket and select the desired speed by turning the speed control
knob.
10. During the preparation you can add ingredients through the fill opening in the lid.
Caution: Do not use the appliance for longer than 10 minutes at a time. After 10 minutes
of use, let the appliance cool down for 30 minutes before using it again.
11. To stop the appliance, turn the speed control knob to the '0' position.
MEAT GRINDER
Turn off the device, and take the plug out of the socket before you add, remove or clean any
accessories.
1.
Open the lid at the tip of the multifunctional head of the food processor: tilt the lid
slightly upwards and remove the lid.
2.
The connecting point for accessories is now shown.
3.
Place the meat grinder at an angle of 25° to the connection point and tighten it by
making a quarter turn clockwise. You hear a click when it is securely fastened. Your meat
grinder is now in a perfect vertical position.
36
DO9182KR
a
b
c

Advertisement

Table of Contents
loading

Table of Contents