Share Start Up - ARTHUR HOLM DynamicShare AHDSSA User Manual

SHARE START UP

Every time that the share system starts up on the master unit, check the
HDMI loop. It takes about 3 minutes to complete this process. During
this process, check the loop on the master unit and assign the AHnet
number of each unit.
When the master unit is checking the loop, the LEDs indicators of all units
are flashing.
If after 3 minutes of starting up the system the LED loop indicators on the
master unit are still flashing or are off, then there is a faulty connection on
HDMI loop. Check the HDMI connections on the monitor units, specially
on monitors where the LED indicators are not flashing.
21