INPUT CONNECTORS
LOOP OUT:
Connect a HDMI cable to the next HDMI LOOP IN AHDSSA
devide, in order to create a daisy chain loop installation.
LOOP IN:
Connect a HDMI cable from the previous HDMI LOOP OUT AH
SHARE device, in order to create a daisy chain loop installation.
HDMI-IN-1 input signal.
AHnet RJ45 out:
Use this connector to control other RS422 AHnet external
devices.
AHnet RJ45 in:
Use this connector ONLY on the MASTER unit. Send AHnet
commands only on the MASTER monitor, and the master unit will send
the commands using the HDMI loop installation, to the other units or
devices.
Ethernet:
AHDSSA system configuration and service. Send AHnet
commands only to the MASTER unit.
10