Summary of Contents for ARTHUR HOLM DynamicShare AHDSSA
-
Page 1: User Guide
User Guide DynamicShare Stand Alone AHDSSA HDMI signal distribution and selection system Technology Serving Desing Danish craftmanship Mediterranean soul... -
Page 3: Table Of Contents
TABLE OF CONTENTS EC REGULATIONS AND SECURITY SAFETY INSTRUCTIONS SYSTEM DESCRIPTION INPUT CONNECTORS AHDSSA AHNET PROTOCOL AHNET WEB API COMMANDS NETWORK CONFIGURATION SHARE START UP INFORMATION ON DISPOSAL WARRANTY TERMS AND CONDITIONS... - Page 4 WELCOME Thank you for purchasing an ARTHUR HOLM product. Our product range has been designed for a seamless integration and for a maximum reliability. Please, read this installation and operating instructions carefully and keep them in a safe place for future reference.
- Page 5 ABOUT US The Company Arthur Holm has its origins in the Danish furniture designer Jorgen Alex Jensen, who was active during the sixties and the seventies. His design inspiration and his concept of ergonomics have been continued by his family, who is the design force behind Arthur Holm product range. The...
-
Page 6: Ec Regulations And Security
EC REGULATIONS AND SECURITY ATTENTION: Do not disassemble or modify the device in any way. This symbol warns of the presence of dangerous un-insulated voltages inside some of the components, of sufficient magnitude to expose people to risk of electronic shock. This symbol draws attention to important use and maintenance instructions in the manual that accompanies the unit. - Page 7 SAFETY INSTRUCTIONS Wiring connected to hazardous voltage requires installation by qualified personnel or the use of ready-made flexible cables. For your security, your equipment must be connected to an electrical outlet with grounding connection protection. Since the plug is used to disconnect the device, the operating electrical outlet must be in an easily accessible place.
-
Page 8: System Description
SYSTEM DESCRIPTION Applications Wired share system that allows to select between 3 different HDMI inputs and to distribute the selected input to the rest of the devices connected in a daisy chain topology. The HDMI signal can be shared on up to 20 monitors in Full HD resolution. DynamicShare Stand Alone is a highly reliable, secure and straightforward solution. - Page 9 SYSTEM DESCRIPTION Box Contents Before the installation of your device please check the contents of the shipping box, it must contain the following items: • AHDSSA • Power cord • User guide • Power supply 100-240Vac, 50-60Hz. Output 12V Important Note: This device can only work with the power supply included in the shipping box.
-
Page 10: Input Connectors
INPUT CONNECTORS LOOP OUT: Connect a HDMI cable to the next HDMI LOOP IN AHDSSA devide, in order to create a daisy chain loop installation. LOOP IN: Connect a HDMI cable from the previous HDMI LOOP OUT AH SHARE device, in order to create a daisy chain loop installation. HDMI-IN-1 input signal. - Page 11 INPUT CONNECTORS 12 DC: Power supply input connector. HDMI-IN-2 input signal. HDMI-IN-3 input signal. HDMI-OUT: Signal output. Connect a HDMI cable to the monitor. SPDIF: Audio embedded output. Maximum length of the HDMI cable: 2 meters. REMOTE: Connect the external control buttons to control the signal. HDMI selection.
-
Page 12: Ahdssa
AHDSSA DynamicShare is equivalent to multiple HDMI selectors connected to multiple cascade HDMI distribution amplifiers in a daisy chain topology, allowing the user to display local sources privately, without affecting the other users in the loop. Control is embedded into the HDMI signal and is carried along with the video signal. - Page 13 AHDSSA Options and accesories • AHSACB: Stand Alone control box for sharing and input selection. VIEW push button: Press this button to select the local HDMI-1, HDMI- 2, HDMI-3, or loop shared input source. Four LEDs indicate the HDMI local signal displayed on the monitor: ∙...
- Page 14 AHDSSA • AHSACBP: Stand Alone control box for sharing, input selection AND priority. On the MASTER unit, it is possible to have control buttons with PRIOTITY Share control function. VIEW push button: Press this button to select the local HDMI-1, HDMI- 2, HDMI-3, or loop shared input source.
- Page 15 AHDSSA Priority Button: Central button. Pressing this button whenl sharing a signal, it will block the loop system and all the units show the signal shared from this unit. The system is blocked and all the units will not be able to work on the system, viewing the signal shared from this unit.
- Page 16 AHDSSA RS422 commands Communication RS422 Connection RJ45 Wiring CAT-5 Speed and configuration Baud Rate 38400 Data Bits Parity NONE Stop Bits Wiring Diagram 1. Data TX + 2. Data TX – 3. Data RX + 4. NC 5. NC 6 .Data RX – RJ-45 7.
-
Page 17: Ahnet Protocol
AHNET PROTOCOL AHnet protocol Using 5 bytes communication: BYTE 0 START BYTE BYTE 1 ADDRESS BYTE BYTE 2 COMMAND BYTE BYTE 3 VALUE 1 BYTE 4 VALUE 2 AHnet DynamicShare commands COMMAND DESCRIPTION RESPONSE FA XX 05 00 00 VIEW LOOP IN FB XX 05 00 00 FA XX 05 01 00 VIEW HDMI1... -
Page 18: Ahnet Web Api Commands
AHNET WEB API COMMANDS It is possible to send AHnet control commands using the network connection on the MASTER unit. Use ETHERNET connector on the MASTER unit to send HTML AHnet commands to control the monitors. IP factory stand alone device 192.168.0.125 Command structure: http://<MasterIP>/ahnet/cmd/<AHNet command>... - Page 19 AHNET WEB API COMMANDS AHnet DynamicShare commands COMMAND DESCRIPTION RESPONSE FA XX 05 00 00 VIEW LOOP IN FB XX 05 00 00 FA XX 05 01 00 VIEW HDMI1 FB XX 05 01 00 FA XX 05 02 00 VIEW HDMI2 FB XX 05 02 00 FA XX 05 03 00...
-
Page 20: Network Configuration
NETWORK CONFIGURATION The factory IP address is 192.168.0.125. You can change the IP address, using the set-up web page. 1. Connect the unit to your network (ETHERNET connector). 2. Type the IP address device on a web browser. 3. Choose Network Setting to set-up the network. Click on Save Settings when you finish the network settings set-up. -
Page 21: Share Start Up
SHARE START UP Every time that the share system starts up on the master unit, check the HDMI loop. It takes about 3 minutes to complete this process. During this process, check the loop on the master unit and assign the AHnet number of each unit. - Page 22 SHARE START UP The first time, connect the master unit to your network, and connect to the master using a web browser. Factory IP address is 192.168.0.125. Go to AHnet control, and click on Rebuild Loop. All the units should appear on the device list.
-
Page 23: Information On Disposal
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to the designated collection points, where they will be accepted on a free of charge basis. -
Page 24: Warranty Terms And Conditions
WARRANTY TERMS AND CONDITIONS Albiral Display Solutions warrants this product against manufacturing defects and workmanship for a period of two (2) years from the date of purchase, subject to the conditions below. 1. Electrical, electronic boards, accessories and power supply are warranted against manufacturing defects and workmanship for a period of two (2) years from the date of purchase. - Page 25 If you have any doubts concerning the terms of this warranty, please contact: business@albiral.com +34 938 502 376 Copyright © Dec. 2019. All rights reserved Albiral Display Solutions SL. Registered trademarks: Albiral, Arthur Holm, Pixtron Broadcast...
- Page 26 Patents P27178ITEP P27178RUPC MU17180ES00 P27178USPC MU17301ES00 P27284DEEP MU17322ES00 P27284EPPC MU17413ES00 P27284ESEP MU17445ES00 P27284GBEP MU17854ES00 P27284RUPC MU17868DEPC P27284USPC MU17868RUPC P27715ESEP P24821DEEP P28089DEEP P24821ESEP P28089ESEP P24821GBEP Fàtima 25, Sant Hipòlit de Voltregà P28089ITEP P24821USPC 08512 Barcelona – Spain P28089USPC P27178DEEP tel: +34 93 850 23 76 / 23 83 P28090EP00 P27178EPDV01 fax: +34 93 850 25 50 / 23 72...