ARTHUR HOLM DynamicShare AHDSSA User Manual page 15

AHDSSA
Priority Button:
signal, it will block the loop system and all the units show the signal
shared from this unit. The system is blocked and all the units will not
be able to work on the system, viewing the signal shared from this
unit. On the rest of the units, the SHARE red light flashes indicating
that the system is blocked from the priority president function.
Use RS422 AHnet RJ45 input signal on the MASTER monitor to send AHnet
commands to control the units. The MASTER unit assigns an identification
number to remote control each unit:
Central button. Pressing this button whenl sharing a
15