1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Recording Equipment
  5. INTE
  6. Manual

Pulsar INTE Manual

Interface ethernet
Hide thumbs Also See for INTE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instructions
Interface ETHERNET
v.1.0
INTE
CODE:
EN
Edition: 2 from 19.12.2012
Supersedes the: 1 from 07.09.2012 edition

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INTE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pulsar INTE

Summary of Contents for Pulsar INTE

  • Page 1 Interface ETHERNET v.1.0 INTE CODE: Edition: 2 from 19.12.2012 Supersedes the: 1 from 07.09.2012 edition...

  • Page 2: Table Of Contents

    INTE CONTENTS 1. General description..........................3 2. Arrangement of the components......................3 3. Installation..............................4 4. Configuration of the Ethernet interface....................5 4.1 Factory settings of the interface............................5 4.2 Preliminary information...............................5 4.3 STEP 1 – Restoring the factory settings..........................5 4.4 STEP 2 –...

  • Page 3: General Description

    INTE Features: • operating in the ETHERNET network through an RJ45 connector • compliant with the IEEE 802.3 standard • physical layer 10/100BaseT • transmission speed 10/100Mbps (auto-sensing) • operation mode: full or half-duplex (auto-sensing) • embedded web server for configuration •...

  • Page 4: Installation

    INTE 3. Installation. The intended location for mounting the interface is inside the PSU’s enclosure with the use of spacers. The connection between the PSU with the mounted interface and a router is to be done with a twisted-pair ending with RJ45 plugs.

  • Page 5: Configuration Of The Ethernet Interface

    INTE 4. Configuration of the Ethernet interface. 4.1 Factory settings of the interface. Login page: Username - root Password - dbps IP address Acquired automatically from the DHCP database of the router Network’s name (SSID) No name Network security...

  • Page 6: Step 2 - Configuration Of The Ip Address

    INTE 4.4 STEP 2 – Configuration of the IP address. To ensure a proper progress of the IP address changing procedure, it is recommended to turn off the firewall of the anti-virus program for the time of configuration process.

  • Page 7: Step 3 - Adjusting Parameters Of The Serial Port

    INTE Fig. 5. The window of network settings. In the window of network settings select the option: ‘Manually configure network settings’ and change the interface’s network IP address into 192.168.1.101 in the unblocked area. The subnet mask and the IP address of the default gateway maintain without changes.
  • Page 8 INTE Fig. 6. The login window of the Ethernet interface. Type: Username: root Password: dbps Approve your entries with the ‘Login’ button. In no time, the window that enables adjustments will be loaded. On the left from the window, there is a menu. Choose the ‘Serial Ports’ option from the ‘Configuration’...
  • Page 9 INTE Next, select ‘Custom’ in the ‘Select Port Profile’ field and approve by clicking ‘Apply’. Fig. 8. The interface’s configuration panel – serial port configuration. After the page has been reloaded, choose the ‘Basic Serial Settings’ tab at the bottom...
  • Page 10 INTE Fig. 9. Configuration of communication parameters of the serial port. Approve the settings with the ‘Apply’ button. Next, choose the ‘Advanced Serial Settings’ tab at the bottom of the page. Make settings in the ‘TCP Settings’ section accordingly to the marked area in the picture below. Approve with the ‘Apply’ button.

  • Page 11: Psu With An Lcd Display

    INTE Reset the Ethernet interface again. It can be done by pressing the “Reset’ button on the module or by cutting off the power for a few seconds. After the reset, the connection between the interface and the router should be re-established after approx.

  • Page 12: Psu With An Led Display

    INTE PSU with an LED display. The PSU is equipped with an LED display which enables adjustment of communication parameters of the serial port from the LED desktop’s level. To enter the adjustment mode press the ‘<,>’ right and left-most buttons simultaneously.

  • Page 13: Configuration Of Connection In The Powersecurity Program

    INTE 5. Configuration of connection in the PowerSecurity program. For further configuration, the PowerSecurity program is required. Download it from the following page: http://www.pulsar.pl/pl/pliki/PowerSecurity.exe The program is saved as an executable file therefore does not require installation in the system.

  • Page 14: Specifications

    According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such WEEE separately. WARRANTY Pulsar K.Bogusz Sp.j. 5 years counted from the device’s production date. Siedlec 150, 32-744 Łapczyca, Polska THE WARRANTY IS VALID only upon presentation Tel.

Table of Contents