Advertisement
Scanning photos
6. Push the black lever to
"PHOTO" position. Lift the
flatbed scanner cover.
7. According to the size of your
photo, place correct photo
positioner on the top left corner of
the glass table. Place your photo
face-down onto the glass table
against the positioner.
8. Press "Scan" to scan the
image. You will be prompted
to save or abandon the
scanned image. If you
choose to save, the image
will be automatically saved
on your SD memory card.
Part B
Operate the scanner
without a SD card
1. The QPIX CBS1400 Combo
scanner has an internal
memory of up to 128MB.
You can operate your scanner
without a SD card. See PART A
steps 2 to 8 for scanning
instructions. All your scanned
images will be automatically
stored into the internal memory of
the scanner.
Note：
1. Please refer to full User Manual for detailed
operations information and product specifications.
2. For other enquiries, please send email to us:
enquiry@qpix.com.au
We endeavour to attend to your enquiries
promptly.
2. Connect your scanner to your
computer via the USB cable.
Remember:
Do not push USB
connector too hard in the
Press "Menu", select "USB
MSDC" and press "Enter".
scanner screen will go
your computer screen, you will
see a new mass storage drive
marked as "NO NAME" which is
the internal memory storage of
the scanner.
3. You can now copy the
scanned images from the
scanner internal memory to
your computer. Once complete,
press "Menu", the
drive will disappear from your
computer screen
port.
The
off. On
"NO
NAME"
.
Advertisement
