Installation For Use; Preparation Of Parts - Peco X20 Convertible Trailer Vac Operator's Manual

Preparation Of Parts

PECO Trailer Vacs are shipped as shown in Figure A.
Note: The following instructions are used in the
installation of both the X20 Trailer Vac & X30 Trailer Vac.
Figure A
Remove the shrink wrap as shown in Figure B.
Figure B
Remove the door as shown in Figure C. Rotate the red
reflectors to release the door. Then lift up and out.
Figure C
Rotate
Reflectors
6
Section II - INSTALLATION FOR USE
Shipping Crate
Cut and Remove
Shrink Wrap
Remove the hoses as shown in Figure D.
Figure D
Release the (2) rubber straps (PER SIDE) as shown in
Figure E.
Figure E
Release
Rubber Straps
Remove the lightweight top as shown in Figure F.
Figure F