Scanning For Dab Stations - Philips AE5000/05 User Manual

DAB Radio

Scanning for DAB stations

New stations and services will be regularly
added in the DAB broadcast.To make new
DAB stations and service available on your
DAB radio, a search is needed.
DAB Scanning:
• In DAB mode, press briefly SCAN to perform
a search of wider range (full scan) for DAB
stations.
Storing DAB presets
You can preset up to 5 DAB stations on the
preset button for easy access.
1 In DAB mode, press
your desired station name is displayed.
• To select desired DAB station, you may also
perform manual tuning (see Manual Tune).
2 Press PRESET once, and then press
select preset numbers.
3 Press and hold PRESET on the top of the
set to store the preset station.
➜ "Preset X Saved" (X indicates preset
numbers) is displayed briefly on the sec-
ond line of the display.
Helpful hints:
– If you have already saved a DAB station in
that preset location, it will be overwritten by a
new station.
– When you store DAB stations, these do not
overwrite your FM presets.
repeatedly until
1 / 2
1 / 2
Selecting a preset DAB sta-
tion
1 In DAB mode, press PRESET on the top of
the set.
2 Press
1 / 2
3 Press SELECT to confirm the selection.
Resetting to the factory set-
ting (also available in FM
mode)
Resetting to the factory setting will delete all
of the preset stations.
1 In DAB or FM mode, press and hold MENU.
➜ "Press SELECT to confirm reset" is dis-
played.
2 To reset, press SELECT.
➜ All the presets will be deleted, and
"Philips DAB & FM Radio" is displayed.
to
• To not to reset, wait a few seconds until
"Press SELECT to confirm reset" disappears.
➜ The radio will revert to the previous
operating status.
to select presets 1-5.