Listen To Dab Radio Stations; Switch To Dab Mode; For The First Time Use; Tune To A Stored Radio Station - Philips ORT2300 User Manual

7 Listen to DAB
radio stations
Note
•
For optimal reception, fully extend the antenna and
adjust its position.
•
You can program a maximum of 20 DAB radio stations.
•
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.

Switch to DAB mode

Press SOURCE repeatedly until [DAB Mode]
is displayed.
» DAB is highlighted.

For the first time use

1
Press SOURCE repeatedly to switch the
product to DAB mode.
2
Press / repeatedly until the [Full
scan] menu is displayed.
3
Press
search.
» This product automatically stores radio
stations with sufficient signal strength.
» After the search is complete, the
first stored radio station is broadcast
automatically.
12 EN
to activate the automatic
4
Press / to select a station, and then
press the knob to start listening.
Tip
•
You can re-scan to update the list of stored stations
(see 'Re-scan for stations' on page 13).
•
You can tune to a station manually (see 'Tune to a
station manually' on page 13).
About special symbols
Some symbol may be displayed before the
name of a station.
• H: The station is one of your 10 favorite
stations.
• ?: The station is unavailable or inactive.
• : The station is a primary station with
secondary service.
• : The station is a secondary station.

Tune to a stored radio station

1
Press / repeatedly to select a station.
2
Press PRESET to start listening.

Program radio stations

1
Tune to a DAB radio station.
2
Press and hold PRESET to activate the
programming.
3
Press / repeatedly to select a preset
sequence number.
4
Press PRESET to confirm.
» The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
• To tune to a stored radio station, press
PRESET to access the list of stored radio
stations, and then press / repeatedly.