ASROCK X299 Steel Legend User Manual page 80

ODT WR (D1)
Configure the memory on die termination resistors' WR for channel D1.
ODT WR (D2)
Configure the memory on die termination resistors' WR for channel D2.
ODT PARK (A1)
Configure the memory on die termination resistors' PARK for channel A1.
ODT PARK (A2)
Configure the memory on die termination resistors' PARK for channel A2.
ODT PARK (B1)
Configure the memory on die termination resistors' PARK for channel B1.
ODT PARK (B2)
Configure the memory on die termination resistors' PARK for channel B2.
ODT PARK (C1)
Configure the memory on die termination resistors' PARK for channel C1.
ODT PARK C2)
Configure the memory on die termination resistors' PARK for channel C2.
ODT PARK (D1)
Configure the memory on die termination resistors' PARK for channel D1.
ODT PARK (D2)
Configure the memory on die termination resistors' PARK for channel D2.
ODT NOM (A1)
Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto].
ODT NOM (A2)
Use this to change ODT (CH A2) Auto/Manual settings. The default is [Auto].
ODT NOM (B1)
Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].
ODT NOM (B2)
Use this to change ODT (CH B2) Auto/Manual settings. The default is [Auto].
74