Cpu Configuration - ASROCK X299 Steel Legend User Manual

Load Optimized CPU OC Setting
You can use this option to load optimized CPU overclocking setting. Please note that
overclocking may cause damage to your CPU and motherboard. It should be done at your
own risk and expense.

CPU Configuration

Multi Core Enhancement
Improve the system's performance by forcing the CPU to perform the highest fre-
quency on all CPU cores simultaneously. Disable to reduce power consumption .
CPU Ratio
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the BCLK will increase the internal CPU clock speed but also affect the
clock speed of other components.
AVX2 Negative Offset
AVX2 Negative Offset reduces core frequency. The AVX2 Negative Offset specifies a
negative offset from the Turbo Ratio Limit for AVX2 workloads.
AVX3 Negative Offset
AVX3 Negative Offset reduces core frequency. The AVX3 Negative Offset specifies a
negative offset from the Turbo Ratio Limit for AVX3 workloads.
CPU Mesh Max OC Ratio
Use this item to set the maximum OC Ratio for the CPU Mesh.
CPU Mesh Min Ratio
Use this item to set the minimum OC Ratio for the CPU Mesh.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Speed Shift Technology
Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-states.
66