Garmin vivohub 2 Installation Instructions Manual

Installation Instructions
Device Overview
The vívohub device is an ANT
supports Garmin wellness products. Using the ANT wireless
®
protocol, the vívohub device detects and connects to compatible
activity trackers automatically. User data uploads to Garmin
Connected Services over a wireless connection automatically.
User data is available for review on Garmin Connect
your wellness partner (if applicable). The vívohub device is
installed as a wireless client on an existing wireless network.
HDMI ® Connects the device to a compatible TV or monitor
connector for initial setup and maintenance.
Connects the device to a compatible TV or monitor
during normal operation to show device
synchronization progress and other information
(optional).
microSD ™ Accepts a microSD memory card.
memory card
The memory card can contain image files to
slot
customize the status screen
Status Screen, page
USB port Connects the device to a mouse for initial setup
and maintenance.
Connects the device to the ANT wireless adapter
for regular use.
Power LED Appears solid when the device has power.
Micro-USB port Connects the device to a 5 Vdc power source.
How is the device monitored?
• The administrator can monitor the device using the Garmin
Connect account to which the device is registered.
• If the device is connected to a TV or monitor for normal use,
status information, including a device-maintenance
notification, appear on the TV or monitor
page 2).
How is the device configured?
The device is configured by connecting it to a compatible TV or
monitor with an HDMI port, and using a USB mouse
Started, page 1).
How is the device updated?
The device updates automatically when an update is available
through Garmin Connected Services
Preferences, page 4).
Where should the device be installed?
The device placement depends on the number of devices being
used, the size of your facility, user movement and location
December 2015
vívohub
™
® to Wi‑Fi ® wireless bridge that
™ or through
(Customizing the
3).
(Status Screen,
(Getting
(Setting Software Update
patterns, and the frequency of data collection
Considerations, page

Device Support

2
If the device is purchased as part of a wellness provider
partnership, you can contact your wellness provider for support.
Otherwise, you can go to www.garmin.com/wellness/vivohub.
You can view a list of supported fitness trackers at
www.garmin.com/vivohub2.
Getting Started
When using the device for the first time, you must complete
these tasks to set up the device.
1
Connect the device to a 5 Vdc USB power source (not
included) using the micro-USB port
cable (Connecting the Device to External Power, page
2
Connect a USB mouse
3
Connect the device to an HDMI port on a compatible TV or
monitor.
If necessary, use the included HDMI extension cable
make the connection.
4 If necessary, change the source on your TV or monitor to
view the output from the device.
5
Follow the on-screen instructions to configure the device
(Configuring the Device, page
6
Remove the mouse from the USB port, and install the
included ANT wireless adapter.
7
From the status screen, bring an activity tracker within range
and test the connection and synchronization.
8
Install the device in an appropriate location using the
included hook-and-loop wall-mount strip
Considerations, page
Installation Considerations
• The devices should be installed in common areas.
TIP: In some facilities, you can install a device in a single
common corridor. In other facilities, you should install multiple
devices to accommodate foot-traffic patterns.
• Each device should be installed in an open location, typically
on a wall.
NOTE: Any material between the device and compatible
activity trackers, especially metal, can potentially degrade
performance.
• If a device must be installed in an enclosed location, you
should test and monitor the synchronization performance with
a compatible activity tracker.
• Each device should be installed in a location where the
wireless network connection is reliable.
(Installation
1).
and included USB
(not included).
2).
(Installation
1).
2).
to
190-01941-02_0B