Safety Information - Everybot Edge User Manual

Safety Information

This contents below are important notifications that contain for using the machine
correctly and preventing unpredictable damage or danger for users.
EVERYBOT Inc. assumes no responsibility for technical or editorial errors or omissions
contained herein, nor for any incidental or consequential damages and failures of
appliance caused by not following the precautions and instructions.
Warnings
■
Please use power source and socket with correct voltage and current.
■
Do not use unauthorized power adaptor or multiple plugs in a single socket.
■
Do not use damaged power cord or plug.
■
Make sure the power cord is not bent or crushed by heavy objects.
■
When plugging in or removing the power plug, always plug it in or remove it by holding
the plug, not the cable.
■
Do not use a damaged power cord! To repair or replace a damaged power cord,
contact a qualified service agent to ensure safety.
■
Do not touch the plug or wall socket with wet hands.
■
Do not use the robot cleaner in a place where it can be exposed to direct sunlight
or where the temperature is too low or too high. (Lower than -5°C and higher than 40°C)
■
Do not use the robot cleaner in a place where children, seniors physicallychologically
challenged people, or pets are residing alone.
■
The robot cleaner is not intended for use by children, or by persons with limited physical,
sensory or mental capabilities.
■
Ensure clothes or any part of the body (hair, finger, foot, etc.) not to get entangled in
the rotating plate of the robot cleaner.
■
Do not use or store the robot cleaner near flammable materials
(alcohol, gasoline, kerosene, thinner, etc.) or heating sources. (cigarettes, candles, stove, etc.)
■
If you notice smoke or a burning smell or an unusual sound from the robot cleaner,
turn the system power switch o immediately and contact your service center.
■
Do not disassemble or try to fix the robot cleaner except for assigned repairing
center or engineer.
2