Safety; Safety Symbols; Safety Warnings - McCrometer ProComm HL Installation, Operation And Maintenance Manual

Electromagnetic flow meter converter, for use in non-hazardous locations, for use in hazardous locations: class i, division 2, groups a-d, t5/class i, zone 2 iic t5
Table of Contents

Advertisement

ProComm

SAFETY

Safety Symbols

Throughout this manual are safety warning and caution information boxes. Each warning and caution box will be identified
by a large symbol indicating the type of information contained in the box. The symbols are explained below:

Safety Warnings

!
This symbol indicates important safety information. Failure to follow the instructions can
result in serious injury or death.
i
This symbol indicates important information. Failure to follow the instructions can result in
permanent damage to the meter or installation site.
When installing, operating, and maintaining McCrometer equipment where hazards may be present, you must protect
yourself by wearing Personal Protective Equipment (PPE) and be trained to enter confined spaces. Examples of confined
spaces are manholes, pumping stations, pipelines, pits, septic tanks, sewage digesters, vaults, degreasers, storage tanks,
boilers, and furnaces.
WARNING!
!
Incorrect installation or removal of FPI Mag meters can result in serious injury or death. Read the
instructions in this manual on the proper procedures carefully.
WARNING!
!
Never enter a confined space without testing the air at the top, middle, and bottom of the space. The
air may be toxic, oxygen deficient, or explosive. Do not trust your senses to determine if the air is safe. You
cannot see or smell many toxic gases.
WARNING!
!
Never enter a confined space without the proper safety equipment. You may need a respirator, gas de-
tector, tripod, lifeline, and other safety equipment.
WARNING!
!
Never enter a confined space without standby/rescue personnel within earshot. Standby/rescue
personnel must know what action to take in case of an emergency.
WARNING!
!
Pressurized pipes should only be hot tapped, cut, or drilled by qualified personnel. If possible,
depressurize and drain the pipe before attempting any installation.
WARNING!
!
Carefully read all safety warning tags attached to the meter.
At the end of its lifetime, this product shall be disposed of in full compliance with the
environmental regulations of the state in which it is located.
Page 1
SAFETY
30124-60 Rev. 1.2 | 16DEC2019

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProComm HL and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Procomm standardProcomm

Table of Contents