Power Supply; Basic Features - Philips AJ100/37B Owner's Manual

# MIN + / PRESET 3
$ SET TIME / PRESET 4
% HR + / PRESET 5
^ VOLUME
–
adjusts the sound level

POWER SUPPLY

Mains adapter
1 Connect the mains adapter to the set's DC 7.5V socket and to the power
socket.
Helpful hints: To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.
SELF-POWERED BACK-UP
The self-powered back-up conveniently allows your preset stations, alarm and clock
time settings to be stored for up to 3 minutes when there is a power interruption e.g.
AC power failure. The complete clock radio and backlight illumination will be switched
off.
If power supply returns after 3 minutes and the display shows:
• clock time blinking - indicates you need to re-adjust the clock time.

BASIC FEATURES

Reset
Should your set receive external interference e.g. static electricity from carpets, thun-
derstorms, etc. RESET allows you to clear all previous settings and start up again.
• Use a ballpoint pen to press the RESET hole found on the bottom of the set.
Illumination brightness
Press REPEAT ALARM /
–
adjusts the minutes for clock and alarm times
–
stores, recalls and shows station 3
–
sets the clock time
–
stores, recalls and shows station 4
–
adjusts the hours for the clock and alarm times
–
stores, recalls and shows station 5
BRIGHTNESS CONTROL
once or more.