Setting The Alarm; Using The Alarm - Philips AJ3916/79 User Manual

CD Player
➜ When SHUFFLE mode is selected, the
disc will play automatically around few
seconds later.
3 To return to normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press 9 once to cancel your
play modes.
Notes:
– During playback, when shuffle mode is
selected, shuffle play will begin only when
playback of current track comes to an end.
– Selection of shuffle mode is not available in
the program mode.
Connecting an external device
You can listen to the sound of the connected
external device through your AJ3916's
speakers.
1 Press SOURCE to switch to AUX mode
➜ '
' is displayed
2 Connect an external equipment such as MP3
player to AJ3916's AUX-in
Helpful hints:
– AJ3916 cannot control playback or any
function on the external equipment
– Ensure the external equipment is powered
on.

Using the alarm

Two different alarm times can be set.This can
be useful when you and your partner need
to be woken up at different time. Besides, you
can set different alarm sounds respectively
among: CD( ), tuner( ), buzzer( ), or
sound of nature( ).

SETTING THE ALARM

1 Press and hold ALARM 1 until hour digits
start flashing.
2 Hold down or press ∞ / § repeatedly to
set the desired hour.
3 Press ALARM 1 to confirm.
➜ Minute digits start flashing.
4 Hold down or press ∞ / § repeatedly to
Auxiliary connection/Alarm
set the desired minute.
5 Press ALARM 1to confirm.
➜
is displayed.
6 Press SOURCE repeatedly to select the
desired alarm sound.
➜ when sounds of nature is selected, press
PRESET +/– to select any one of the 5
provided sounds (
➜ when CD is selected, press ∞ / § to
select the desired track.
7 Press ALARM 1 to confirm.
8 Repeat the steps above but press ALARM 2
instead of ALARM 1 to set the other alarm.
Helpful hints:
– Insert a CD if you select CD source as
alarm mode. CD will play from the first
track, or the track you have selected during
the alarm setting. If a CD is not loaded,
Church Bell (sound of nature) will auto turn
on.
– To check the alarm time setting for
ALARM 1 or ALARM 2, press ALARM
1 or ALARM 2.
Switching off the alarm
Daily alarm reset
If you want the alarm to be stopped immedi-
ately but also wish to repeat the alarm call at
the same time for the following day:
• During the alarm call, press SLEEP.
Repeat alarm
This repeats your alarm call at 9 minute
intervals.
• During the alarm call, press REPEAT
ALARM /BRIGHTNESS CONTROL.
™
Alarm sound indicator flashes during a
repeat alarm.
• Repeat if desired.
Deactivating the alarm completely
• Press once or more corresponding
ALARM1 or ALARM2 until
pears.
).
disap-