Philips AJ3915/05 User Manual
Philips clock radio aj3915 cd
Hide thumbs
Also See for AJ3915/05:
- Specifications (2 pages) ,
- Quick start (4 pages) ,
- Specifications (2 pages)
Related Manuals for Philips AJ3915/05
Summary of Contents for Philips AJ3915/05
- Page 1 CD Clock Radio AJ3915 Register your product and get support at www.philips.com/welcome User manual...
-
Page 2: Important Notes For Users In The U.k
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BS1362 3. - Page 3 ¡ &...
- Page 4 ¡ &...
-
Page 6: Power Supply
English Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Controls (see 1) 1 REPEAT ALARM – pushes to switch off alarm for a 6-minute period 2 LCD Display – shows the clock/ alarm time... -
Page 7: Setting The Clock
Clock 1 Insert the battery into the battery compartment for clock memory backup. 2 Connect the power plug to the wall outlet. Replace the battery once a year, or as often • as necessary. Batteries contain chemical substances, so they should be disposed of properly. Setting the clock The clock uses 24-hour time format.You may set the clock from 0:00 if the set is... -
Page 8: Auxiliary Connection
CD Player Selecting a different track Press ∞/ § once or repeatedly until the • desired track number appears on the display. In the stop position, press ); to start • playback. ➜ The selected track number appears briefly on the display when you press ∞, § to skip tracks, then it switches back to clock display. -
Page 9: Using The Alarm
Alarm Using the alarm AJ3915 allows you to simultaneously set two different alarms (ALARM 1 and ALARM 2 ) which can go off in the CD, radio or buzzer mode.The clock time needs to be set correctly before using alarm. Setting alarm time 1 Press and hold ALARM 1 or ALARM 2 until clock digit(s) for hour flashes. -
Page 10: Cd Player And Cd Handling
Sleep Sleep The CD clock radio has a built-in sleep timer, which enables the set to be automatically switched off during radio or CD playback after a set period of time. Setting the sleep time 1 Press POWER to switch to standby. 2 Set your timer by pressing repeatedly SLEEP until the desired timer option appears. -
Page 11: Troubleshooting
Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Do not open the set as there is a risk of electric shock. Under no circum- stances should you try to repair the set yourself, as this will invalidate the warranty. -
Page 12: Class 1 Laser Product
Meet Philips at the Internet http://www.philips.com CLASS 1 LASER PRODUCT AJ3915 Printed in China PDCC-LL-0810...