Charging Ipod Battery Using The Dock - Philips AJ300D/93 User Manual

PLAYING APPLE iPod USING AJ300D
1 Snap the compatible iPod into the dock connector.
2 Press DOCK to switch on the dock mode.
3 The connected player will play automatically.
Notes:
– In dock mode, if no player is docked for 15 minutes, AJ300D will come to standby.
– By using the buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ300D and its
remote control, the following disc playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ300D and its remote control
can work only with playback of the audio contents stored on the docked player.

CHARGING iPod BATTERY USING THE DOCK

Docking your iPod and connecting the dock to AJ300D, you can charge the iPod
in the standby mode and power-on mode of AJ300D.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are five sleep time options.
Setting and switching off SLEEP
1 In the active mode, set your timer by pressing SLEEP repeatedly until the desired
timer option appears.
™ Selections are follows (time in minute):
120=90=60=30=15=OFF=120
2 The set will turn off automatically at the selected time.
3 To cancel sleep, press either:
– POWER
– SLEEP once or more until SLEEP disappears from the display.
Reset
Should your set receive external interference e.g. static electricity from carpets, thun-
derstorms, etc. RESET allows you to clear all previous settings and start up again.
• Use a ballpoint pen to press the RESET hole found on the bottom of the set.