Ipod Dock; Compatible Ipod Players; Selecting The Correct Dock Adaptor; Setup - Philips DCM230/55 User Manual

iPod Dock

Compatible iPod players

●
Most Apple iPod models with 30-pin dock
connectors as follows:
Nano 1st /2nd/3rd generation, iPod 5th
generation (video), iPod touch and iPod classic.
Selecting the correct dock
adaptor
●
4 iPod dock adaptors of different type, as
indicated at the back of the adaptor, are included
to fit the following iPod:
Nano 1st /2nd/3rd generation, iPod 5th
generation (video), iPod touch and iPod classic.

Setup

●
Insert a dock adapter corresponding to the
portable player you use.
2
●
To connect with a different iPod portable player,
pop up the corresponding dock adapter and
replace with a new one of the matching type.
24
1 1

Playing an iPod portable player

1
Correctly dock your iPod por table player in the
cradle. Make sure the dock adaptor is
compatible.
●
Make sure that you have powered on your iPod
player before selecting DOCK source.
➜
On the display, "iPod" is displayed if iPod is
connected.
2
Press SOURCE on the system repeatedly or
iPod on the remote control to select iPod
source.
3
Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward, menu selection) during
playback.
Charging iPod battery using the
dock
●
In DOCK mode, directly dock your iPod
portable player on the cradle for charging.
Note:
– For the purpose of SAVING POWER, recharging
of your iPod or USB device is NOT SUPPORTED
when the main set is in the STANDBY MODE.