Setting The Clock Time; Using The Alarm; Setting The Alarm Time - Philips AJ3540/79 User Manual

SETTING THE CLOCK TIME

The time is displayed using the 24-hour clock.
1 Hold down SET TIME/ALARM OFF.
2 Press TIME SET 3 or 4 repeatedly, or hold down TIME SET 3 or 4 to adjust
minute and/or hour.
- TIME SET 3 : to adjust time fast forward
- TIME SET 4 : to adjsut time back
3 Release SET TIME/ALARM OFF and TIME SET 3 or 4 when you reach the
correct setting.
™ The set clock time will show on the display and start to run.

USING THE ALARM

This set allows you to set one alarm (alarm 1 or alarm 2), or set two alarms
simultaneously. This set also offers you two alarm modes: Auto (radio) and Buzz.

SETTING THE ALARM TIME

1 Hold down SET ALARM 1 or SET ALARM 2
2 Press TIME SET 3 or 4 repeatedly, or hold down TIME SET 3 or 4 to
adjust minute and/or hour.
3 Release SET ALARM 1 or SET ALARM 2, and TIME SET 3 or 4 when you
reach the desired time setting. The display will return to the clock time.
SELECTING THE ALARM MODE
1 Adjust AL1/AL2/AL1+2 to AL1 (alarm 1), or AL2 (alarm 2), or AL1+2 (alarm 1
+ alarm 2) .
2 Select your choice of alarm mode by adjusting OFF/ ON/ AUTO/ BUZZ to
AUTO or BUZZ.
™ The corresponding alarm indicator(s) will light up.
Helpful Hint:
• If you have selected the radio mode, make sure you have adjusted the vol-
ume loud enough to wake you.
• The buzzer is set at a fixed volume and cannot be adjusted.