Storage; Troubleshooting; Technical Data - Silk'n Bright ND-FC04 User Manual

Always clean the facial brush after each use.
1. Wash the facial brush with lukewarm water and soap.
2. Thoroughly rinse it with water.
3. Wipe it dry with a dry cloth.

9. Storage

All parts must be completely dry before being stored.
• Store the facial brush in a clean and dry place, avoiding heat
and direct sunlight.
• Keep the facial brush away from children.

10. Troubleshooting

Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the facial brush yourself.
Fault
The facial brush
does not start.
The facial brush
does not charge.

11. Technical data

Facial brush
Model:
Rated voltage:
Rated power:
Battery capacity:
IP code:
Protection class:
Speed settings:
Possible cause and solution
Make sure the facial brush is properly
charged.
Make sure the USB cable is securely connected
between the facial brush and USB wall
adapter, and the USB wall adapter is properly
connected to a mains socket.
ND-FC04
5 V
3 W
500 mAh
IPX7 (protected against
water immersion for up to
30 minutes at a depth of 1 m)
III
7
EN
16