Sony STR-DB930 Operating Instructions Manual page 28

Front Panel Parts Description
!§ The following buttons operate the built-in tuner. For
details, see "Receiving Broadcasts" starting from page
41.
PRESET TUNING +/– buttons
Scans all preset stations.
SHIFT button
Selects a memory page for preset stations.
FM/AM button
Selects the FM or AM band.
!¶ The following buttons operate the built-in tuner. For
details, see "Receiving Broadcasts" starting from page
41.
TUNING/PTY SELECT +/– buttons
Scans all the available radio stations.
Selects program types during PTY operations.
FM MODE button
If "STEREO" flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
MEMORY button
Press to memorize a preset station.
!• LEVEL button
Press to activate the speaker level parameters (page
37). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, rear balance, etc.).
!ª SUR button
Press to activate the surround parameters (page 36).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
28 GB
@º EQ button
Press to activate the equalizer parameters (page 38).
The indicator on the button lights up and you can
adjust the various equalizer parameters.
@¡ Cursor buttons ( / )
Press to select various speaker level, surround, and
equalizer parameters (etc.).
@™ Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc.).
@£ SET UP button
Press to activate the setup mode, then use the cursor
buttons (@¡) to select any of the following indications.
You can then make various settings using the jog dial
(@™).
When you select
Speaker setup
Speaker Distance
Auto Function
2 way remote
(STR-DB930 only)
@¢ NAME button
Press to activate the name function and enter names
for preset stations and program sources (page 49).
@∞ ENTER button
Press to enter individual characters for the preset
station and program source names.
You can
Specify the front, center, rear
speaker sizes, the rear speaker
position, and whether or not you
are using a sub woofer (page 18)
Specify the front, center, and rear
speaker distances and the unit of
measurement (page 18)
Specify wether or not Sony
components connected via
CONTROL A1 cords will turn on
or off when selected using the
function buttons. (page 50)
Turn on or off response to remote
signals sent from the 2 way
remote. (page 51)