Sony STR-DB930 Operating Instructions Manual page 25

1
DIMMER
SPEAKERS DOOR OPEN
A
OFF B
A + B
PRESET TUNING
– +
PHONES
SHIFT FM/AM
MODE button
Press to select and play another video/audio source in
combination with the selected component.
Each time you press the button, the display changes as
follows:
n V:XXX n A:XXX n 2ND AUDIO [XXX]*
selected component N
* STR-DB930 only.
Press MODE to display And rotate FUNCTION to select
V:XXX Any video source to enjoy with
the audio from the selected
component
A:XXX Any audio source to enjoy with
the video from the selected
component
2ND AUDIO [XXX] An audio source (except
(STR-DB930 only) PHONO) to enjoy in your sub
room. "SOURCE" selects the
same program source as the main
FUNCTION control**
** Even if 2ND AUDIO [SOURCE] is selected, no sound is output
when the receiver is set to 5.1CH INPUT. Only signals from
components connected to the analog inputs are output through
the 2ND AUDIO jacks. No signals are ouput from components
connected to only the digital inputs.
• When the 5.1CH INPUT (4) is selected, MODE display
changes as follows:
n V:XXX
5.1CH INPUT N
MULTI CHANNEL DECODING
BASS BOOST
DISPLAY
VIDEO 1 VIDEO 2 VIDEO 3 DVD TV/LD
TUNING/
– PTY SELECT + FM MODE MEMORY PTY RDS EON BASS BOOST
VIDEO 3 INPUT
S-VIDEO VIDEO L AUDIO R
INPUT MODE 5.1CH INPUT
3
A.F.D. MODE 2CH
TAPE MD/DAT CD TUNER PHONO
SOUND FIELD SET UP
LEVEL
A.F.D. MODE 2CH
– +
SUR NAME
EQUALIZER
ENTER
EQ
z Function indicators
Normally, the indicator above the selected function lights orange.
However, when MODE is used to select a different video (V:XXX)
or audio (A:XXX) source, the video function lights green and the
audio function lights orange. This also occurs when you select
audio components (like PHONO).
3 INPUT MODE button
Press to select the input mode for your digital
components (DVD, TV/LD, and MD/DAT
(STR-DB930) or MD/TAPE (STR-DB830)).
Each press switches the input mode of the currently
selected component.
Select
AUTO
DIGITAL (OPTICAL)
DIGITAL (COAXIAL)
ANALOG
MASTER VOLUME
MODE FUNCTION MUTING
2
To
Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected
Specify the digital audio signals
input to the DIGITAL OPTICAL
input jacks
Specify the digital audio signals
input to the DIGITAL COAXIAL
input jacks (DVD only)
Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks
25 GB