How To Use; Before Use - LG K336NS15 Owner's Manual

HOW TO USE

12
HOW TO USE

Before use

Clean the refrigerator.
Clean your refrigerator thoroughly and wipe off all dust that may have accumulated
during shipping.
• Do not scratch the refrigerator with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing any tape
or adhesive from the refrigerator,.
• Do not peel off the model or serial number label or the technical information
on the rear surface of the refrigerator.
Remove adhesive residue by wiping it off with your thumb or dishwashing detergent.
Connect the power supply.
Check if the power supply is connected before use.
Read the "Turning On The Power" section. (Your plug type might be different from
the picture.)
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least three to four hours before putting food in
it. Check the flow of cold air in the freezer compartment to ensure proper cooling.
Putting food in the refrigerator before it has cooled could cause the food
to spoil, or a bad odor could remain inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The loudness will decrease as the temperature lowers.
Before Plugging in, open the refrigerator doors to ventilate the interior.
The inside of the refrigerator may smell like plastic at first. Remove any adhesive
tape from inside the refrigerator and open the refrigerator doors for ventilation until
any odors have subsided.
CAUTiON
NOTE
CAUTiON