Table of Contents
Advertisement
Problem
Possible Causes
There is
Did you store hot food
condensation
without cooling it first?
inside the
Did you leave the appliance
appliance or on
door open?
the bottom of
the vegetable
drawer cover.
Do you open and close the
appliance door frequently?
Did you put warm or moist
food inside without sealing it
in a container?
Frost is formed
Doors may not be closed
in the
properly?
compartment
set to Freeze.
Did you store hot food
without cooling it first?
Is the air entry or exit of the
freezer blocked?
Is the freezer overfilled?
Frost or
Did you open and close the
condensation
appliance door frequently or
has formed
is the appliance door
inside or outside
improperly closed?
the appliance.
Is the installation environment
humid?
The appliance is
Is the appliance installed on a
noisy and
weak floor or improperly
generates
leveled?
abnormal
Does the rear of the appliance
sounds.
touch the wall?
Are objects scattered behind
the appliance?
Is there an object on top of
the appliance?
The side or front
There are anti condensation
of the appliance
pipes fitted to these areas of
is warm.
the appliance to reduce
condensation forming from
around the door area.
TROUBLESHOOTiNg
Solutions
Cool the hot food first before putting it inside
the fridge or freezer.
Although the condensation will disappear soon
after you close the appliance door, you can
wipe it with a dry cloth.
Condensation can form due to the
temperature difference from the outside.
Wipe out the dampness with a dry cloth.
Store food in a covered or sealed container.
Check if the food item inside the appliance is
blocking the door and make sure that the door
is tightly closed.
Cool the hot food first before putting it inside
the fridge or freezer.
Make sure that air entry or exit is not blocked
so that the air can circulate inside.
Maintain an appropriate space between items.
Frosts or condensation can form if the outside
air penetrates inside the appliance.
Condensation can appear on the exterior of
the appliance if the installation area is too
humid or on a humid day such as a rainy day.
Wipe off any moisture with a dry cloth.
Install the appliance on a solid and flat area.
Adjust the installation position to allow enough
clearance around the appliance.
Remove the scattered objects from behind
the appliance.
Remove the object on top of the appliance.
The heat releasing pipe to prevent
condensation is installed on the front and side
of the appliance. You may feel it particularly
hot right after the appliance is installed or
during the summer. You can be assured that
this is not a problem and is quite normal.
25
Advertisement
Table of Contents
