Table of Contents
Advertisement
SETUP menu
Item
Description
FILTER TIME
Displays the usage time of the air filter, counted after the last
resetting.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the filter time, select the OK using the ► button.
CANCEL
OK
• Reset the filter time only when you have cleaned or replaced the
air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section Cleaning and replacing
the air filter (
).
113
FILTER MESSAGE
LIGHT & FILTER
(continued)
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the filter unit
After choosing an item except OFF, the message "REMINDER ***
HRS PASSED ...." appears after the timer reaches the interval time
set by this feature.
When the OFF is chosen, the message does not appear. Use this
feature to keep the air filter clean, setting the suitable time according
to your environment of this projector.
• Clean the filter periodically. If the air filter becomes to be blocked
by dust or other matter, the internal temperature rises, which could
cause malfunction, or reduce the lifetime of the projector.
• Be careful with the operating environment of the projector and the
condition of the filter unit.
(continued on next page)
74
QM00481-1
Advertisement
Table of Contents
