Dukane 8980WUSS User Manual page 111

Item
MY TEXT
DISPLAY
MY TEXT
WRITING
(continued on next page)
(1) Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the ► or
ENTER button to display the MY TEXT DISPLAY
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
ON OFF
When it is set ON, the MY TEXT is displayed on the
START UP screen and the INPUT_INFORMATION
when the INFORMATION on the SERVICE menu is
chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING dialog
is displayed.
(2) The current MY TEXT is displayed on
the first three lines. If not yet written, the
lines is blank.
Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and
enter characters. To erase 1 character
at one time, press the RESET button or
press the ◄ and INPUT button at the
same time. If you move the cursor to
DELETE or CLEAR ALL on screen and
press the ENTER or INPUT button, one
or all characters are erased. The MY
TEXT can be input up to 24 characters
on each line.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first three
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ►, ENTER or INPUT button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the ◄, ENTER or INPUT button.
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
Description
111
SECURITY menu
QM00481-1