Dukane 8980WUSS User Manual page 102

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
RESPONSE LIMIT TIME
Select the time period to wait for receiving
response data from other device communicating by
the NETWORK BRIDGE and the HALF-DUPLEX
through the CONTROL port.
OFF: Select this mode if it is not required to check
1s /2s /3s: Select the time period to keep the
COMMUNICATION
(continued)
• This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD (
• OFF is selected as the default setting.
STACK
Selecting this item displays the STACK menu. For
more information, see the Instant Stack Guide.
• When STACK MODE is set to MAIN or SUB,
the other items in COMMUNICATION menu are
invalid.
WIRED NETWORK
Selects whether to use LAN or HDBaseT port.
CONTROL
TERMINAL
・ You cannot operate CONTROL
Description
OFF 1s 2s
the responses from the device that the projector
sends data to. In this mode, the projector can
send out data from the computer continuously.
projector waiting for response from the device
that the projector sends data to. While waiting a
response, the projector does not send out any
data from the CONTROL port.
LAN HDBaseT
NOTE ・ Only the LAN or HDBaseT port
can be used for the connection to the network.
Switch it according to the environment.
TERMINAL when NETWORK(WOL) is
selected in SETUP menu - STANDBY
MODE.
102
3s
101).
QM00481-1