How To Access Service Mode - Samsung HLS4676SX/XAA Service Manual

Alignment & Adjustment

3-2 How to Access Service Mode

1. Turn off the power to put the unit into the STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" button on the Remote Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
3. Initial DISPLAY State in times of Service Mode Switch overs
Option
DDP3021(K520)
CCA(ON)
SP Actuator
DNIe
X240
X240 NTSC
MST3389
STV8258DSX
Cinema CCA
ESP
CHECKSUM
SERVICE
T-EINLUS0-XXXX
T-EINLUS5-XXXX
ACL xx.xx.xx
RFS....
20xx-xx-xx
T-LEEUM-xxxx
4. Buttons operations within Service Mode
MENU
Direction keys ▲ / ▼
Direction keys ◀ / ▶
Source
Enter
3-2
Full Menu Display / Move to Parent Menu/ Move to upper menu
Item Selection by Moving the Cursor
Data Increase/Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Item Selection/execution
Samsung Electronics