Alignment & Adjustment
3-2 How to Access Service Mode
1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)
Info → Menu → Mute → Power On
※ When failing to enter Service Mode, repeat the procedure above.
2. The initial screen of Service Mode.
Service/T-NG2PEU_XXX
Option(XX XX XX)
Deflection
Video Adjust 1
Video Adjust 2
Video Adjust 3
Video Adjust 4
Video Adjust 5
YC Delay
EEPROM
Checksum(0000)
Reset/XX-XX-XX XXPage
3. Functions of the Keys within Service Mode
MENU
▲ / ▼
◀ / ▶
3-2
Show all menus
Move the cursor to select an item.
Adjust the selected configuration value
Samsung Electronics