Factory Data - Samsung HLS4676SX/XAA Service Manual

3-3 Factory Data

1. OPTION
No Item
1 Factory Reset
2 Lamp Control
3 WB Reset
4 EER Reset
5 User Reset
6
DIGITAL→DMD
7 Lamp Clear
8 Lamp life
9 AUTO POWER
10 MUTE TIME
11 EDID WRITE
12 DELAY MOD
13 DBG/ANY SEL
14 DDC Protection
15 Downloadable RRS
16 PROTECT
17 WATCH DOG
18 WD COUNT
19 HDCP HPD
20 Melody vol
21 Test Pattern(GR)
22
DMD→Digital
23 PC Ident
24 Shop Mode
Samsung Electronics
★ The underlined are items applied during the service adjustment. None of the others should be adjusted.
Range Default
Dynamic/always Dynamic
on/off OFF
0h
on/off ON
600ms
on/off OFF
Debug/Anynet Debug
on/off ON
on/off ON
on/off ON
on/off ON
0
on/off on
0~10 2
Auto/enable Auto
On/Off On
Remark
All setting is back to the factory setting
Dynamic, Always
Initialize the White Balance value
Clear the EEPROM
All setting is back to the default
Transfer engine adjustment data from digital to DMD
Clear the Lamp life time
Lamp on time counter
on/off
Time which the screen will be black while switchingchannels
Sound Delay Module ON/OFF selection
Sound Delay Module ON/OFF selection
Select the use of the Service jack
DDC write ON/OFF selection
Downloadable RRS on/off selection
Protection ON/OFF selection
Watch Dog ON/OFF selection
Count for Watch Dog event
HDMI/DVI HOT PLUG Control
Melody Volume Control
scaler test pattern
Transfer engine adjustment data from DMD to digital
PC indent mode
Shop mode selection
Alignment & Adjustment
3-3