Important - Philips AJ310/12 User Manual

1 Important

• Read these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the alarm clock.
• Only use attachments/accessories specified
by the manufacturer.
• Unplug this alarm clock during lightning
storms or when unused for long periods
of time.
• Refer all servicing to qualified service
personnel. Servicing is required when
the alarm clock has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the alarm clock, the
alarm clock has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
alarm clock:
• Install all batteries correctly, + and - as
marked on the alarm clock.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the alarm
clock is not used for a long time.
• This alarm clock shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
alarm clock (e.g. liquid filled objects, lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
EN
3
the disconnect device shall remain readily
operable.
Modification of the product could result in
hazardous radiation of EMC or other unsafe
operation.