Stihl RMA 510 Instruction Manual page 6

English
Storing the Unit
When the machine is not in use, store it
so that it does not endanger others.
Secure it against unauthorized use.
Accessories and Spare Parts
Only use cutting blades and accessories
that are explicitly approved for this
power tool by STIHL. If you have any
questions in this respect, consult a
servicing dealer. Use only high quality
tools and accessories in order to avoid
the risk of accidents and damage to the
machine.
STIHL recommends the use of genuine
STIHL tools and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
Drive
Battery
Observe the information in the leaflet or
instruction manual supplied with the
STIHL battery and keep it in a safe
place.
For further notes on safety visit
www.stihl.com/safety-data-sheets.
Charger
Observe the information in the leaflet
supplied with the STIHL charger and
keep it in a safe place.
4
Notes on Operation
Removing the Fuse Key
and
take the battery out of the
machine
before
before carrying out inspections,
–
adjustments or cleaning work
performing any work on the cutting
–
blade
leaving the machine unattended
–
before transporting the machine
–
before storing the machine
–
before performing repairs or
–
maintenance work
in the event of danger or in an
–
emergency
This avoids the risk of the motor starting
unintentionally.
Before Starting Work
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual.
The switch lever and switch lever
–
lockout must move freely and return
to the idle position when they are
released.
Switch lever locked in position when
–
switch lever lockout is not
depressed.
Check that the cutting blade is
–
properly and securely mounted and
in good condition.
Inspect the power tool for damage
–
or wear. Always replace damaged
parts.
Do not use your power tool if safety
–
devices are damaged, the coasting
brake does not operate or safety
devices are not mounted (e.g.
ejection chute shield).
Never use your machine with a
–
damaged grass box.
Never attempt to modify the controls
–
or safety devices in any way.
Keep the handles dry and clean –
–
free from oil and dirt – for safe
control of the power tool.
Check contacts in battery
–
compartment for foreign matter.
Fit the battery correctly – it must
–
engage audibly.
Never use defective or deformed
–
batteries.
RMA 510