Switching On - Stihl RMA 510 Instruction Manual

Switching On

A factory-new battery is not fully
charged.
Recommendation: Fully charge the
battery before using it for the first time.
Opening the Cover
1
Lift the cover (1) up and swing it
N
forwards as far as stop.
Fit the fuse key
The motor can be started only when the
fuse key is fitted.
3
2
Push the fuse key (2) into the
N
socket (3) as far as stop.
RMA 510
Fitting the Battery
4
Insert the battery (4) in the battery
N
compartment and push it home.
The battery engages in position.
Closing the Cover
1
Close the cover (1).
N
The cover must always be closed during
operation.
Starting
Do not start the motor in high grass or in
the lowest setting since this makes
starting more difficult.
6 5
Press in the switch lockout
N
button (5) with your right hand and
hold it there.
Pull the switch lever (6) towards the
N
handle with your left hand and hold
it until you hear an audible click.
Release the lockout button (5).
N
English
17