Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
AT+ CDEBYTEIOT
Function: Set/Query the IP and port address of the Ebyte IoT cloud platform.
Format:
Query
Send: AT+ CDEBYTEIOT<CR>
Return: <CR><LF>+OK=<ip>,<port><CR><LF>
Set
Send: AT+ CDEBYTEIOT=<ip>,<port><CR>
Return: <CR><LF>+OK<CR><LF>
AT+EBTIOT
Function: Set/Query Ebyte IoT platform.
Format:
Query
Send: AT+EBTIOT <CR>
Return: <CR><LF>+OK=<ctrl><CR><LF>
Set
Send: AT+EBTIOT =<ctrl><CR>
Return: <CR><LF>+OK<CR><LF>
Para:
ctrl Ebyte IoT platform switch ON Turn on / OFF Turn off
Note: After the IoT cloud function is enabled, the device is automatically connected to the Ebyte IoT platform,
ignoring
AT+CSQ
Function: Query signal strength.
Format:
Query
Send: AT+CSQ<CR><LF>
Return: <CR><LF>+OK=<csq><CR><LF>
Para:
csq signal strength
Note: None
AT+CREG
Function: Query whether to register to the operator network.
Format:
Query
Send: AT+CREG<CR><LF>
Return: <CR><LF>+OK=<creg><CR><LF>
Para:
creg
1 Registered to the network
0 Not registered to the network
Note: None
AT+CPIN
Function: Query SIM card status.
Format:
Query
Send: AT+CPIN<CR><LF>
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
the sock configuration and registration packet, heartbeat packet function.
E840-TTL-NB03 User Manual
16
Advertisement
Table of Contents
