Manual Esync; Multiple Usb Cradles; Use The Displaykey Usb Cradle; Internet Configuration - Supra TRACcess DisplayKEY Quick Manual

Table of Contents

Advertisement

6.
Enter the IP server address to your database or server.
7.
Select the OK button.

Manual eSync

Perform a manual eSync to verify that the installation was successful.
Step
Action
1.
Press the enter button to turn on the DisplayKEY.
2.
Scroll to MANUAL ESYNC and press enter.
3.
Place the DisplayKEY in the cradle.
Note: Entering the 4-digit PIN code is a one-time step per computer. If the PC Sync Application is re-installed, the 4-digit
PIN code will have to be re-entered.
4.
When prompted on the computer, type in the 4-digit PIN code.

Multiple USB Cradles

Depending on the USB port availability, up to five (5) DisplayKEY USB cradles can be connected to a computer at one time.
To add an additional cradle to a computer after the initial installation, follow the instructions in ""Install Software and Connect
Cradle" on page 3, step 4.
After Windows installs the driver for the cradle, select Start > Programs > Supra > USB Cradle Finder and follow the
onscreen instructions.

Use the DisplayKEY USB Cradle

After a successfully manual eSync is performed, the cradle is ready for the DisplayKEY to eSync automatically each night
through your Internet connection.
For the DisplayKEY to perform the automatic update, the computer must be on and have a live Internet connection. You do
not need to be logged on. If the computer is in Sleep/Standby or Hibernation mode an eSync will not occur.
Do not disconnect the cradle from the computer while the DisplayKEY is performing an eSync. It is safe to disconnect the
cradle at any other time.

Internet Configuration

The cradle software automatically detects and uses a proxy server during the eSync process. If unable to eSync due to
server connection failures, you may need to change the Internet connection settings.
To change the Internet connection settings, double click the Supra icon in the lower right corner of the computer screen
to open the DisplayKEY eSYNC Info window, then click Edit Settings. For assistance, contact the Support Team at
1-877-699-6787.
5

Advertisement

Table of Contents
loading

Table of Contents