Enter an Access Code
To access the TRACcess device, obtain an access code from the system administrator and enter it into the DisplayKEY.
Step
Action
On the DisplayKEY, press enter to turn it on.
1.
2.
Scroll to the INPUT UPDATE OR ACCESS CODE menu option and press enter.
3.
Press 2 to select ACCESS CODE.
4.
Enter the access code and press enter.
Obtain and Enter Update Code
Before the DisplayKEY eSync is required you can obtain a one-time emergency update code.
Step
Action
1.
For the Americas, call 1-888-968-4032.
2.
When prompted, enter into the phone keypad the DisplayKEY serial number and PIN code and press the # sign.
3.
Press 1 on the phone for an update code.
4.
On the DisplayKEY, press enter to turn it on.
5.
Scroll to the INPUT UPDATE OR ACCESS CODE menu option and press enter.
Enter the update code and press enter.
6.
Open Device
Bluetooth
devices use the infrared interface to communicate with the DisplayKEY and do not need to place the key in the
®
device bezel to operate.
•
For Bluetooth devices, turn on the device (if required) and aim the DisplayKEY at its infrared port.
•
For classic TRACcess devices, insert the DisplayKEY into the bezel on the device.
DisplayKEY Menu Options
- OPEN DEVICE
- INPUT UPDATE OR ACCESS CODE
- RELEASE SHACKLE
Basic Start Up
To reset the DisplayKEY press enter and the number 1 at the same time.
Step
Action
1.
Press enter to turn on the DisplayKEY.
2.
Scroll to the OPEN DEVICE option and press enter.
3.
Enter the 4-digit PIN code and press enter.
Open TRAC-Box BT Smart & TRAC-Lock BT Smart (including TRAC-Lock with Alarm Interface)
Step
Action
1.
Press the button on the device to turn it on, if required.
2.
Aim the DisplayKEY at the device infrared port.
- READ DEVICE
- REVIEW MESSAGES
- ESYNC PHONE #
2
- ERROR CODES
- BATTERY STATUS
- VIEW LAST ENTRY
- SELECT LANGUAGE
- MANUAL ESYNC