Usb Cradle Installation Instructions; System Requirements; Install Software And Connect Cradle - Supra TRACcess DisplayKEY Quick Manual

Table of Contents

Advertisement

Open and Close a TRAC-Lid BT Smart
Step
Action
1.
Press the button on the device to turn it on.
2.
When the light flashes, move the thumb lever counter-clockwise 90° until it stops.
3.
Grasp the TRAC-Lid by its sides and pull to remove.
4.
To close, place the TRAC-Lid in the TRAC-Vault and turn the thumb lever clockwise 90° until it stops.
Open and Close a Classic TRAC-Lid
Step
Action
1.
Move the thumb lever counter-clockwise 180° to a horizontal position with the flat side down.
2.
Grasp the TRAC-Lid by its sides and pull to remove.
3.
To close, place the TRAC-Lid in the TRAC-Vault and turn the thumb lever clockwise 180° until the flat side is vertical.
View Last Entry
If the keys are missing after opening a device, display the last time the device was accessed with View Last Entry.
Step
Action
1.
Press enter to turn on the DisplayKEY.
Scroll to the VIEW LAST ENTRY menu option and press enter.
2.
3.
Press enter to view the company name and phone number.

USB Cradle Installation Instructions

First, verify the computer system meets the requirements listed below. Second, install the DisplayKEY USB cradle software
drivers onto the computer before connecting the cradle to the computer.

System Requirements

Before installing the software, make sure the system meets the following requirements:
Windows
10 operating system (64-bit), Windows 8, Windows 7, Windows XP, Windows Vista, or Windows 2000
®
Professional (all platforms 32-bit or 64-bit unless otherwise noted)
15 MB of free disk space
Available USB port
Open Internet connection

Install Software and Connect Cradle

Navigate to
www.traccessmanager.com
DisplayKEY USB cradle software, and select Downloads and
Resources. Select the download for your computer. The
application is based on the default language of the computer's
Operating System (OS), if supported.
Note: With Windows 10, 8, 7, and Vista, disable the User
Account Controls. Windows XP users may encounter one or
more Installation Warning messages during the installation.
Click Continue Anyway if you encounter this message.
to download the
3

Advertisement

Table of Contents
loading

Table of Contents