Table of Contents
Advertisement
Quick Start
DisplayKEY Buttons
The DisplayKEY electronic key works with the Supra
code that allows authorized users to access TRACcess devices. The DisplayKEY functions are supported in six (6) different
languages: English, French, Spanish, German, Italian, and Portuguese.
enter
Up and Down arrows
enter + 1
Connect Cradle
The software must be loaded on the computer before connecting the cradle. The DisplayKEY cradle charges and updates
the DisplayKEY. The light on the front of the cradle is
when the DisplayKEY and cradle are communicating, and
USB Cradle
Go to the "USB Cradle Installation Instructions" on page 3 and follow the instructions to install and connect the DisplayKEY
cradle software.
Analog Cradle
Step
Action
Note: The cradle can act as a splitter. Plug the phone cord from the telephone into the open port on the back of the cradle.
1.
Insert one end of the provided phone cord into one of the two phone ports on the back of the cradle.
2.
Insert the other end of the phone cord into an open analog phone line.
3.
Insert the provided AC adapter into the AC connector and plug the cradle into an electrical outlet.
Perform an eSync
There are two (2) different ways to perform an eSync. The eSync is complete when the KEY UPDATED status is displayed.
•
Automatic eSync - place the DisplayKEY on the cradle before midnight each night. Important! The cradle must
be connected to a power source and either an open Internet connection or open phone line.
•
Manual eSync - an eSync performed at any time to update the DisplayKEY.
Step
Action
1.
Press enter to turn on the DisplayKEY.
Press the arrow buttons to scroll to the MANUAL ESYNC menu option and press enter.
2.
3.
Place the DisplayKEY in the cradle.
Battery Status
Step
Action
1.
Press enter to turn on the DisplayKEY.
2.
Scroll to the BATTERY STATUS menu option and press enter.
Turns the key on, selects a menu option, or accepts a code. Press enter a second time and hold
for 2 seconds to turn on the backlight.
Scroll up and down throught the menu.
Exit from a function or submenu.
TRACcess
Manager system. Each DisplayKEY has a 4-digit PIN
®
®
when the DisplayKEY is connected and charging,
green
when an eSync is occurring.
red
1
amber
Advertisement
Table of Contents
