Bosch Gluey Original Instructions Manual page 14

14 | English
Cordless glue pen
Glue stick length
Glue stick max. storage
temperature
Batteries (NiMH)
Operating time per bat-
tery charge (2100 mAh)
A)
up to
Weight according to
EPTA-Procedure 01:2014
Battery (NiMH)
Rated voltage per cell
Capacity
Number of battery cells
A) depends on application
Charging station
Article number
Input voltage
Battery charging voltage
Charge current
Permitted charging tem-
perature range
Charging time (at
2100 mAh battery capa-
city) approx.
Weight according to
EPTA-Procedure 01:2014
The performance of the charging station depends on the properties of
the power source.
Fitting
Charging batteries
Remove batteries from the glue pen to charge them. To do so,
unscrew the battery compartment cover (7).
Insert the batteries into the charging station (10). When doing
so, ensure that the polarity is correct according to the illustra-
tion on the inside of the charging station.
The charging station is supplied with energy via a suitable USB
connection.
Connect the micro USB connector (12) of the charging cable
(13) with the charging station (10) and connect the USB char-
ging connector (14) with the USB port of a PC, mobile com-
puter or power bank.
The LED (11) will flash during the charging process. When the
charging process is complete, the LED (11) will be perman-
ently lit. Disconnect the charging station from the power
source and remove the batteries from the charging station.
Read and observe the operating instructions of the USB power
source regarding the charging station specifications to pre-
vent the power source from being damaged. If irregularities
appear on the tool when connected to the power source, dis-
connect the charging station from the power source.
1 609 92A 4MF | (11.12.2018)
mm
°C
2 × 1.2 V HR6 (AA)
60 glue sticks
kg
V
mAh
Bosch USB Charger
1 600 A01 5M4
V=
V=
mA
°C +5 to +40
hrs
kg
Bosch Power Tools
Gluey
20
25
0.12
1.2
2100
2
5
2.8
280
8
0.04