Table of Contents
Advertisement
5
Reattach the outer filter to the filter holder and put the filter
holder back into the dust compartment. Make sure you insert the
filter holder in the correct way (Fig. 9).
Never use the vacuum cleaner if the filter unit is still wet.
Replacement
Replace the inner filter if it can no longer be cleaned properly
(usually after it has been cleaned about 50 times).
Always replace the inner filter with an original Philips FC8038 inner filter.
1
Remove the filter unit from the dust compartment (Fig. 8).
2
Turn the outer filter anticlockwise (1) and remove it from the
holder (2) (Fig. 10).
3
Gently turn the inner filter anticlockwise (1) and remove it
from the holder (2) (Fig. 11).
4
Place a new filter on the holder (1) and turn the filter clockwise (2)
to attach it to the holder (Fig. 12).
5
Push the tip of the inner filter inwards (Fig. 13).
6
Place the outer filter on the holder (1) and turn the filter clockwise
(2) to attach it to the holder (Fig. 14).
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/
service or go to your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the worldwide guarantee
leaflet for contact details).
-
New inner filters are available under type no. FC8035.
ENGLISH
9
Advertisement
Table of Contents
