Set Time And Date; Turn On - Philips DCB291/05 User Manual

Note
•
The type plate is located on the bottom of the
main unit.
Connect the power adapter to the wall outlet.

Set time and date

1
In standby mode, press and hold SET
TIME for 2 seconds.
» [SYNC ON] is displayed and [ON]
begins to blink.
2
Press / or /
ON or OFF.
» [ON]: The unit synchronizes time from
the DAB+ station.
» [OFF]: The time synchronization with
DAB+ station is deactivated.
3
Press SET TIME to confirm.
» [24H] or [12H] begins to blink.
4
Press / or /
hour format.
5
Press SET TIME to confirm.
»
The hour digits begin to blink.
6
Repeat steps 4-5 to set the hour, minute,
year, month, and day.
Note
•
If clock is not manually set, when iPod/iPhone/
iPad is connected, the unit synchronizes time
from the iPod/iPhone/iPad automatically.
10 EN
repeatedly to select
to select the 12/24
Tip
• The accuracy of the transmitted time depends
on the DAB+ station or the docked iPod/
iPhone/iPad that transmits the time signal.

Turn on

Press POWER.
»
The unit switches to the last selected
source.
Tip
•
To select a source, press
or the source selection buttons on the remote
control.
Switch to standby mode
Press POWER again to switch the unit to
standby mode.
»
The time and date (if set) appear on
the display panel.
SOURCE repeatedly