Other Features; Set The Alarm Timer; Set The Sleep Timer; Adjust Display Brightness - Philips DCB291/05 User Manual

6 Other features

Set the alarm timer

You can set two alarms to ring at different time.
Note
•
Ensure that you have set the clock correctly.
(See "Get started - Set time and date".)
1
Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
[AL1]/ [AL2] and the hour digits
begin to blink.
2
Press / or /
the hour.
3
Press ALARM 1 or ALARM 2 to confirm.
»
[AL1] / [AL2] and the minute
digits begin to blink.
4
Repeat steps 2-3 to set the minute.
5
Repeat steps 2-3 to select whether
to ring alarm for the whole week, on
weekdays, or at weekend.
6
Repeat steps 2-3 to select an alarm sound
source: Buzzer, iPhone, FM, or DAB+.
7
Repeat steps 2-3 to set the alarm volume.
Activate/deactivate the alarm timer
Note
•
Ensure that you have already set the alarms
successfully.
1
Press ALARM 1/ALARM 2 to view the
alarm settings.
2
Press ALARM 1/ALARM 2 repeatedly to
activate or deactivate the alarm timer.
»
The alarm icon appears if the alarm
timer is on and disappears if it is off.
repeatedly to set
Repeat alarm
When alarm rings, press REPEAT ALARM.
»
The alarm repeats ringing minutes later.
Tip
•
You can press REPEAT ALARM repeatedly to
adjust the interval (5-30 minutes) to repeat
alarm.
Stop alarm ring
When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
»
The alarm stops but the alarm settings
remain.

Set the sleep timer

This unit can switch to standby mode
automatically after a preset time period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
»
When the sleep timer is activated,
appears.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off) is
displayed.

Adjust display brightness

Press BRIGHTNESS CONTROL repeatedly to
select different brightness levels.
EN 15